Yamaha HTR-5140 Owner's Manual - Page 19
CONNECTING SPEAKERS, Main speaker connections, Subwoofer connection
View all Yamaha HTR-5140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
English CONNECTING SPEAKERS Main speakers A Main speakers B Right Left Right Left SPEAKERS R MAIN L OUTPUT SUB WOOFER REAR CENTER R (SURROUND) L Rear speakers Left Right Subwoofer system Center speaker Note Use speakers with the specified impedance shown on the rear panel of this unit. Main speaker connections One or two speaker systems can be connected to this unit. If you use only one speaker system, connect it to either of the SPEAKERS A or B terminals. Rear speaker connections A rear speaker system can be connected to this unit. Place them to the rear of your listening position. Center speaker connection A center speaker can be connected to this unit. Place it on or under the TV. Subwoofer connection You may wish to add a subwoofer to reinforce low frequencies or to output low bass sound from the subwoofer channel. If you have a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the SUBWOOFER OUTPUT terminal of this unit to the input terminal of the subwoofer system. If you have a separate amplifier and subwoofer, connect the SUBWOOFER OUTPUT terminal of this unit to the input terminal of the subwoofer amplifier, and then connect the speaker terminals of the subwoofer amplifier to the subwoofer. When the input signals to this unit are for normal 2-channel stereo, this terminal outputs only frequencies below 90 Hz from the main and center channels. When discrete signals are input to this unit and are selected as the input source, this terminal outputs signals from the subwoofer channel. Note: The output level of signals from this terminal is adjusted by VOLUME on the front panel or VOLUME ( ) on the remote control transmitter. 19