Yamaha HTR-5140 Owner's Manual - Page 9

English CONTROLS AND THEIR FUNCTIONS FRONT PANEL 1 STANDBY/ON Press this switch to turn on the power to this unit. Press it again to set this unit to the standby mode. Standby mode In this state, this unit consumes a very small quantity of power to receive infrared-signals from the remote control transmitter. 2 Remote control sensor This receives signals from the remote control transmitter. 3 Display This shows various information. (Refer to page 11 for details.) 4 MEMORY (MAN'L/AUTO FM) Press this button to store the broadcasting stations. When this button is pressed and held for more than three seconds, the automatic preset tuning begins. 5 EDIT This button is used to exchange the assignment of two preset stations with each other. 6 TUNING MODE (AUTO/MAN'L MONO) Press this button to switch the tuning mode to automatic or manual. To select the automatic tuning mode, press this button so that the "AUTO TUNING" indicator lights up on the display. To select the manual tuning mode, press this button so that the "AUTO TUNING" indicator goes off. 7 FM/AM Press this button to switch the reception band to FM or AM. 8 TUNING UP/DOWN This button is used for tuning. Press the UP side to tune in to higher frequencies, and press the DOWN side to tune in to lower frequencies. 9 TAPE/MD MON / EXT. DECODER Press this button to play a tape or an MD. The "TAPE/MD MON" indicator lights up on the display. When you press the button next, the "TAPE/MD MON" indicator goes off, "EXT. DECDR" appears on the display and you can play the signal connected to the EXTERNAL DECODER INPUT terminals. 0 INPUT Turn this selector to select the program source (VCR, VIDEO AUX, TV/DBS, DVD/LD, CD, TUNER, PHONO) to listen to or watch. The name of the selected program source appears on the display. 9