Yamaha HTR-5150 Owner's Manual - Page 19

How to connect, Connecting to the MAIN SPEAKERS terminals, Connecting to the REAR and CENTER - parts

Get Yamaha HTR-5150 PDF manuals and user guides View all Yamaha HTR-5150 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

English How to connect Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is the + and - markings are observed. If these wires are reversed, the sound will be unnatural and lack bass. Caution Do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit. This could damage the unit and/or speakers. Connecting to the MAIN SPEAKERS terminals Connecting to the REAR and CENTER SPEAKERS terminals Red: positive (+) Black: negative (-) 2 1 3 1 Unscrew the knob. 2 Remove approx. 5 mm (1/4") of insulation from each of the speaker wires and insert one bare wire into each terminal. 3 Tighten the knob to secure the wire. Red: positive (+) Black: negative (-) 3 2 1 Press the tab. 2 Remove approx. 5 mm 1 (1/4") of insulation from each of the speaker wires and insert one bare wire into each terminal. 3 Release the tab to secure the wire. Banana plug connections are also possible. Simply insert the banana plug connector into the corresponding terminal. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
19
English
How to connect
Connect the
SPEAKERS
terminals to your speakers with wire of the proper gauge, cut as short as possible.
If the connections are
faulty, no sound will be heard from the speakers.
Make sure that the polarity of the speaker wires is correct, that is the + and –
markings are observed.
If these wires are reversed, the sound will be unnatural and lack bass.
Caution
Do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit.
This could
damage the unit and/or speakers.
Connecting to the MAIN SPEAKERS terminals
Red: positive (+)
Black: negative (–)
1
Unscrew the knob.
2
Remove approx. 5 mm
(1/4”) of insulation from
each of the speaker
wires and insert one
bare wire into each
terminal.
3
Tighten the knob to
secure the wire.
1
Press the tab.
2
Remove approx. 5 mm
(1/4”) of insulation from
each of the speaker
wires and insert one
bare wire into each
terminal.
3
Release the tab to
secure the wire.
1
2
3
2
3
1
Connecting to the REAR and CENTER
SPEAKERS terminals
Red: positive (+)
Black: negative (–)
Banana plug connections are also possible.
Simply insert the
banana plug connector into the corresponding terminal.