Yamaha HTR-5150 Owner's Manual - Page 27
When you have finished using this unit, or the button that
View all Yamaha HTR-5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
English 4 For a DVD/LD or TV/DBS source, the current input mode is also shown. * To change the input mode for the DVD/LD or TV/DBS source, press INPUT MODE (or the button that you have pressed to select the input source in step 3 on the remote control) once or more until the desired input mode is shown on the display. (See page 28 for details on switching the input mode.) Front panel Remote control 7 Adjust the volume to the desired output level. Front panel Remote control or or Input mode 5 Select the main speakers to be used. Front panel 8 If desired, adjust BASS, TREBLE, BALANCE, etc. and use the digital sound field processor (see pages 36 to 37). BASS: Turn this control clockwise to increase (or counterclockwise to decrease) the lowfrequency response. TREBLE: Turn this control clockwise to increase (or counterclockwise to decrease) the highfrequency response. BALANCE: Adjust the balance of the output volume from the left and right speakers to compensate for any sound imbalance caused by the speaker location or listening room conditions. Front panel * If you use two main speaker systems, press both A and B. 6 Play the source. (See page 30 for detailed information on tuning.) * These controls are only effective for the sound from the main speakers. Front panel Remote control or When you have finished using this unit Press STANDBY/ON on the front panel again or STANDBY on the remote control to set this unit in the standby mode. 27