Yamaha HTR-5250 Owner's Manual - Page 42
CBL INPUT Selecting the initial
View all Yamaha HTR-5250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
SET MENU 8. DTS LFE (Adjusting the output level of the LFE channel for DTS) Control range: -10 dB to +10 dB (in 1 dB steps) Preset value: 0 dB 10.MEM. GUARD (Locking the settings) Choices: ON/OFF Preset position: OFF Note • This adjustment is effective only when DTS is being decoded and the selected source encoded with DTS contains LFE signals. This adjusts the output level of the LFE channel. If the LFE signals are mixed with signals of other channels and they are directed to the same speakers, the ratio of the LFE signal level to the level of the other signals can be adjusted. 9. CNTR DELAY (Adjusting the delay of the sound from the center speaker) Control range: 0 ms to 5 ms (in 1 ms steps) Preset value: 0 ms If you wish to prevent accidental alterations to the settings of the SET MENU and other adjustments on this unit, select the ON position. The following settings on this unit can be locked: • Settings of other items on the SET MENU • Settings in the TIME/LEVEL mode • Settings when using TEST 11.TV INPUT (Selecting the initial input mode for a source connected to the D-TV input terminals) Choices: AUTO/LAST Preset position: AUTO This adjusts the delay between the main sound (on the main channels) and dialog, etc. (on the center channel). The larger the value, the later the dialog, etc. is generated. This makes sounds from the left main, center and right main speakers reach your listening position at the same time. This is achieved by delaying the sound from the center speaker if the distance from the center speaker to your listening position is shorter than the distance from the right and left main speaker to your listening position. The input mode for a source connected to the D-TV input terminals of this unit can be automatically set when the power of this unit is turned on. Refer to page 23 for details about the input mode. AUTO In this position, the input mode is always set to AUTO. LAST In this position, the input mode is automatically set to that selected the last time when the power of this unit was turned on. 12.CBL INPUT (Selecting the initial input mode for a source connected to the CBL/SAT input terminals) Choices: AUTO/LAST Preset position: AUTO The input mode for a source connected to the CBL/SAT input terminals of this unit can be automatically set when the power of this unit is turned on. Refer to page 23 for details about the input mode. AUTO In this position, the input mode is always set to AUTO. LAST In this position, the input mode is automatically set to that selected the last time when the power of this unit was turned on. 38