Yamaha HTR-5930 Owner's Manual - Page 9
Phones Jack, Speakers, Straight, Tone Control, Program, Input Mode, Input, Multi Ch Input - remote control
View all Yamaha HTR-5930 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
INTRODUCTION A PHONES jack Outputs audio signals for private listening with headphones. Notes • When you connect headphones, no signals are output at the SUBWOOFER OUTPUT jack or at the SPEAKERS terminals. • All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels. B SPEAKERS Turns on or off the set of front speakers connected to the A and/or B terminals on the rear panel. C STRAIGHT Turns the sound field programs off or on. When this unit is in the "STRAIGHT" mode, 2-channel or multi-channel input signals are output directly from their respective speakers without effect processing. D TONE CONTROL Adjusts the bass/treble balance of the front left and right speakers in conjunction with BASS/TREBLE +/-. E BASS/TREBLE +/- Adjusts the bass/treble balance of the front left and right speakers in conjunction with TONE CONTROL. F PROGRAM l / h Selects sound field programs. G INPUT MODE Selects either digital or analog input signals exclusively or sets this unit to automatically detect the type of input signals and select the corresponding input signals when one component is connected via both digital and analog connections. H INPUT l / h Selects the desired input source. I MULTI CH INPUT Selects the component connected to the MULTI CH INPUT jacks as the input source. Note The input source connected to the MULTI CH INPUT jacks takes priority over the source selected with INPUT l / h on the front panel (or the input selector buttons on the remote control). CONTROLS AND FUNCTIONS 5