Yamaha HTR6280BL Owner's Manual - Page 67
Controlling Zone2, Switching to the Zone2 operation mode
![]() |
UPC - 027108933603
View all Yamaha HTR6280BL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
INTRODUCTION PREPARATION BASIC OPERATION ADVANCED OPERATION Controlling Zone2 You can select and control Zone2 by using the control keys on the front panel or on the remote control. The available operations are as follows: • Selecting the input source. • Tuning into the desired station (when "TUNER" is selected as the input source) • Tuning into the desired channel (when "XM" or "SIRIUS" is selected as the input source) (U.S.A. model only) • Adjusting the volume of Zone2 (when Zone2 speakers are connected to the EXTRA SP terminals). Switching to the Zone2 operation mode Before controlling Zone2 by using the control keys on the front panel or on the remote control, follow the procedure below to switch this unit to the Zone2 operation mode. ■ To control Zone2 by using the front panel control keys Press CZONE2 CONTROL while Zone2 is turned on. The ZONE2 indicator flashes on the front panel display for approximately 10 seconds. Using multi-zone configuration • Select "DOCK" to use the iPod features (page 43) or Bluetooth features (page 45) in Zone2. • Select "SIRIUS" to use the SIRIUS Satellite Radio features (page 38) in Zone2. • Select "XM" to use the XM Satellite Radio features (page 34) in Zone2. ZONE Flashes 2 Note • Complete each step while the ZONE2 indicator is flashing on the front panel display. Otherwise, the Zone2 mode is automatically canceled and this unit returns to the main zone operation mode. ■ To control Zone2 by using the remote control Switch bMAIN/ZONE2 to the "ZONE2" position. Operations in the Zone2 operation mode ■ Turning on or set Zone2 to standby Press AZONE2 ON/OFF (or pPOWER). ■ Operating Zone2 Rotate the RINPUT selector (or press dInput selection key) to select the desired input source. • Select "AV5", "AV6", "AUDIO1", "AUDIO2", "V- AUX" or "PHONO" to listen to the input source in Zone2. • Select "TUNER" to use the FM/AM radio features (page 30) in Zone2. • Select "USB" to use the USB features (page 46) in Zone2. ADDITIONAL INFORMATION APPENDIX English 63 En
![](/manual_guide/products/yamaha-htr6280-owners-manual-95bb3b1/67.png)