Yamaha IM8-32 Owner's Manual - Page 13
STEREO AUX RETURN TR IN/USB AUX RETURN Jacks, AUX Controls 1-4, Bus Assign Switches
View all Yamaha IM8-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
English STEREO AUX RETURN Section Rear Panel Top Panel 1 2 3 Controls and Functions 5 PFL Switch/Indicator When the PFL switch is on, the indicator will light and the signal before the AUX controls and RETURN control in the STEREO AUX RETURN section is output to the MONITOR OUT and PHONES jacks for monitoring. NOTE · When you turn on the PFL switch, the PFL indicator in the MONITOR section (page 18) will light. 2TR IN/USB Section Rear Panel Front Panel 1 4 5 1 AUX RETURN Jacks These are unbalanced phone-jack type line inputs. Signals input from these jacks can be sent to the GROUP 1/ 2-7/8, ST L/R, MONO, and AUX 1-4 buses. To the MONO and AUX 1-4 buses, a mix of the L/MONO and R signal is sent. These jacks are typically used to receive the signal returned from an external effect device (reverb, delay, etc.). NOTE · These jacks can also be used as auxiliary stereo inputs. · If you connect to the L/MONO jack only, the mixer will recognize the signal as monaural and will send the identical signal to both the L/MONO and R jacks. 2 AUX Controls (1-4) These adjust the level at which the signals from the AUX RETURN jacks are sent (with L and R mixed) to the AUX 1-4 buses. The "▼" position of the knob is nominal level (0 dB). 3 Bus Assign Switches These switches determine the bus(es) to which the signal is received from the AUX RETURN jacks. • 1-2, 3-4, 5-6, 7-8 switches: Send the signal to the GROUP 1/2-7/8 buses. • ST switch: Sends the signal to the ST L/R bus. • MONO switch: Sends the signal to the MONO bus. 4 RETURN Control Adjusts the level of the signal sent from the AUX RETURN jacks to the GROUP 1/2-7/8, ST L/R, or MONO buses. The "▼" position of the knob is nominal level (0 dB). NOTE · The signals sent to AUX 1-4 are not affected by the RETURN control. 2 Top Panel 3 4 5 1 2TR IN Jacks These are RCA pin jacks and a mini-phone jack (stereo) for inputting a stereo audio source. Use these jacks when you want to connect a CD player, and output the signal to the ST L/R or MONO bus. NOTE · If signals are simultaneously input from the 2TR IN jacks (RCA pin jacks, mini-phone jack) and the USB connector, the signals will be mixed. 2 USB Connector Connects to the computer via the included cable to input and output the signals. This connector outputs the same signal as the REC OUT jacks. The signal input from this connector is sent to the ST L/R bus or the MONO bus. When connecting or disconnecting the USB cable be sure to turn the 2TR IN/USB control all the way down. Precautions when using the USB connector When connecting the computer to the USB connector, make sure to observe the following points. Failing to do so risks freezing the computer and corrupting or losing Owner's Manual 13