Yamaha IMX644 Owner's Manual - Page 11
OUTPUT V] Switch, Euroblock Connectors
View all Yamaha IMX644 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
9 [+48V] Switch When ON, 48V phantom power is applied to the corresponding mono input. Turn the [+48V] switch ON for channels to which phantom-powered condenser microphones or other devices that require phantom power are connected. • Make sure that phantom power is turned OFF unless it is needed. • When turning phantom power ON, make sure that no equipment other than phantom-powered devices such condenser microphones are connected to the corresponding MONO INPUT connectors. Applying phantom power to a device that does not require phantom power can damage the device. • Do not connect or disconnect a device to a MONO INPUT while phantom power is applied. Doing so can damage the connected device and/or the unit itself. • Make sure that the system's power amplifiers and/or powered speakers are turned OFF while turning phantom power ON or OFF to prevent damage to the speakers. We also recommend setting all level controls to minimum level. If these measures are not observed sudden high-level noise bursts can potentially damage equipment and even the hearing of people in the area. ■ OUTPUT Section ) Euroblock Connectors These balanced output connectors are for connection to power amplifiers and other output devices. OUTPUT 1 and 2 are stereo outputs. The A connector outputs the left-channel signal, and the B connector outputs the rightchannel signal. OUTPUT 1 and 2 can also be assigned for mono output via the IMX644 Manager application. OUTPUT 3 and 4 are mono outputs. Refer to page 13 for instructions on connecting to the Euroblock connectors. Controls and Functions IMX644 Owner's Manual 11