Yamaha MA2120 MA2120 Setup Guide - Page 15
List of DIP Switch Settings, [SETUP] DIP switches
View all Yamaha MA2120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Setup Mode (Advanced settings) List of DIP Switch Settings DIP switch functions are also listed in the "Controls and Functions" section of the owner's manual. Only operate DIP switches when the device is powered off or in standby mode. The setting change will be applied after carrying out a power cycle by pressing the [z] button on the front panel. [SETUP] DIP switches DIP switch 1/2: Panel lock Set knobs and controls to be locked on the panel. 1 2 Setting Panel lock off (All controls are enabled) Locks the [SETUP] knob Locks controls other than [VOLUME] knobs Panel lock on (All controls are disabled) DIP switches 3/4: Auto-wake Enable the function where the device automatically turns on from standby mode upon detection of an input signal. 3 4 Setting Auto-wake function on Auto-wake function on. Only when the system is switched from AC off to standby mode due to insertion of the AC plug, or put into standby mode by the auto-standby function. Auto-wake function off NOTE The auto-wake function is completely disabled if the device has been put into standby mode through operation via the [REMOTE] connector. DIP switch 5: A - B volume link Sets whether SPEAKER A and SPEAKER B volume is linked. When linked, the volume for both speakers can be controlled with the [VOLUME A] knob. 5 Setting Link off (SPEAKER A and SPEAKER B volume levels are independently controlled) Link on (SPEAKER A and SPEAKER B volume levels are both controlled via the [VOLUME A] knob) NOTE If you turn on "A - B volume link" when the function to allow control of the line out volume A and B by the [VOLUME] knob is enabled in setup mode, LINE OUT A and B are also linked. DIP switch 6: DCP volume link Sets whether the [SPEAKERS] and [LINE OUT] jack output levels are linked, when changing the volume via the DCP. 6 Setting Link off ([SPEAKERS] and [LINE OUT] jack volume levels are controlled separately) Link on ([SPEAKERS] and [LINE OUT] jack output is controlled together) NOTE When the link function is on, you can control the volume by using both of [SPEAKER] and [LINE OUT] on the control panel. MA2120 Setup Guide 15