Yamaha MDX-E100 Owner's Manual - Page 14
Monitor Out, Protecting A Recorded Md, Input, Rec/pause
View all Yamaha MDX-E100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
MONITOR OUT When a disc is not loaded, you can use the monitor out function to monitor the sound of the input source. 1& NATURAL SOUND MINIDISC RECORDER MDX-E100 STANDBY/ON / INPUT REC/PAUSE REC LEVEL ANALOG - DIGITAL + MIN MAX 2 3 1 Press to remove the disc. 2 Press INPUT repeatedly to select the input connected to the sound source you want to monitor. 3 Press REC/PAUSE. "Monitor Out" appears in the display. Sound from the selected input will be output from this unit's analog and digital output terminals. 4 Start playing the sound source. The sound is output from the MD recorder's analog and digital output terminals. To cancel Press &. Notes • This function is useful to monitor the sound of an external digital component connected to the DIGITAL OPTICAL 2 IN jack. • The digital volume can be adjusted when using the monitor out function. However, please note that the digital volume setting is restored to the default (0 dB) the next time a recording is made. PROTECTING A RECORDED MD Tab Slide the tab to open the slot. • To protect a recorded MD, slide the tab on the side of the MD to open the slot. In this position, the MD cannot be used for recording, editing, or titling. To record, edit, or title the MD, slide the tab to close the slot. • If the MD is protected against erasure, "Protected" appears in the display. E-14