Yamaha MG32 MG32/14FX MG24/14FX Owners Manual - Page 18

TALK BACK MIC Jack, Talkback Control, AUX1-4 Switch, ST Switch, LAMP Jack

Get Yamaha MG32 PDF manuals and user guides View all Yamaha MG32 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Front & Rear Panels ■ TALK BACK Section 1 ■ LAMP Jack 2 3 4 1 MIC Jack An unbalanced XLR input jack, for connection to a talkback microphone. NOTE This jack does not supply phantom power. 2 Talkback Control Adjusts the talkback level. 3 AUX1-4 Switch If this switch is on ( ), the mixer feeds the signal from the MIC jack into AUX buses 1 to 4. 4 ST Switch If this switch is on ( ), the mixer feeds the signal from the MIC jack to the ST bus. LAMP Jack An XLR3 pin-type output jack, for connection to a lamp. NOTE Supported lamps: 12V (AC or DC), max. 5W. Supplies 12V to Pins 2 and 3. Pin 1 is not connected. IMPORTANT: Please read carefully before connecting a lamp. • Do not use a lamp that grounds Pin 2 or Pin 3 to the shell (body). Use of the wrong lamp type may result in damage to the mixer. Recommended lamps: Littlite's X-HI series of gooseneck lamps. Correct lamp type Shell 12 3 Wrong lamp type 12 3 12 3 • Do not inadvertently connect a talkback microphone to the LAMP jack. A microphone may sustain damage if connected to this jack. 18 MG32/14FX, MG24/14FX

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
Front & Rear Panels
MG32/14FX, MG24/14FX
18
■
TALK BACK Section
1
MIC Jack
An unbalanced XLR input jack, for connection to a talkback
microphone.
This jack does not supply phantom power.
2
Talkback Control
Adjusts the talkback level.
3
AUX1-4 Switch
If this switch is on (
), the mixer feeds the signal from the
MIC jack into AUX buses 1 to 4.
4
ST Switch
If this switch is on (
), the mixer feeds the signal from the
MIC jack to the ST bus.
■
LAMP Jack
LAMP Jack
An XLR3 pin-type output jack, for connection to a lamp.
Supported lamps: 12V (AC or DC), max. 5W.
Supplies 12V to Pins 2 and 3. Pin 1 is not con-
nected.
1
2
3
4
NOTE
IMPORTANT: Please read carefully before con-
necting a lamp.
•
Do not use a lamp that grounds Pin 2 or Pin 3 to the
shell (body).
Use of the wrong lamp type may result in damage
to the mixer.
Recommended lamps: Littlite's X-HI series of goose-
neck lamps.
• Do not inadvertently connect a talkback micro-
phone to the LAMP jack.
A microphone may sustain damage if connected to
this jack.
NOTE
Wrong lamp type
1
2
3
1
2
3
Correct lamp type
1
2
3
Shell