Yamaha MM8 Owner's Manual - Page 83

Messages LCD Message Access error! All Memory Clearing... Are you sure? Backup Clearing... Cancel Clearing... Completed Data Error! End Error! File information area is not large enough. File is not found. File too large. Loading is impossible. Format OK ? [EXECUTE] Formatting... Load OK ? Loading... Media is not inserted. Media capacity is full. Memory Full MIDI receive buffer overflow. Now Writing... (Don't turn off the power now, otherwise the data may be damaged.) Overwrite ? Save OK ? Saved data is not found. Saving... Send OK? Sending... Since the media is in use now, this function is not available. Sure ? [YES/NO] The limit of the media has been reached. The media is not formatted. The media is write-protected. There are too many files. This function is not available now. Comment Indicates the failure in reading or writing from/to the media or the flash memory. Displayed while erasing all data in the flash memory. Never turn the power off during data transmission. Confirms whether Song Clear or Track Clear is executed or not. Displayed while clearing the back-up data in the flash memory. Displayed when the transmission of Initial Send is cancelled. Displayed while executing Song Clear or Track Clear for a user song. Indicates the completion of the specified job, such as saving data or transmission. Displayed when the user song contains illegal data. Displayed when transmission of Initial Setup data has been completed. Displayed when a write operation has failed. Indicates that data cannot be saved to the media because the total number of files is too large. Indicates that there is no file. Indicates that data cannot be loaded because the file is too large. Confirms whether the media format operation is executed or not. Displayed while formatting. Confirms whether loading is executed or not. Displayed while loading data. This message will appear if you attempt to access a memory device when no memory device is connected to the USB TO DEVICE terminal. Displayed when data cannot be saved because the memory media is full. Displayed when the internal memory becomes full during song recording. Displayed when the MIDI receive buffers overflows. Displayed while writing data to the memory. Never turn the power off while writing. Doing so may result in data loss. Confirms whether overwriting is executed or not Confirms whether saving is executed or not Displayed when the data to be saved doesn't exist. Displayed while saving data to the memory. Never turn the power off while saving. Doing so may result in data loss. Confirms whether the data transmission is executed or not Displayed while transmitting data. Indicates that the file control function is currently unavailable since the media is being accessed. Reconfirms whether each operation is executed or not Indicates that data cannot be saved because the folder/directory structure has become too complicated. Indicates that the inserted media has not been formatted. Indicates that the inserted media cannot be written to because it is write-protected. Set the write-protect switch to the "overwrite" position before use. Indicates that data cannot be saved because the total number of files exceeds the maximum capacity. Indicates that the designated function is not available because the instrument is executing another job. NOTE • Not all messages are listed in the table. MM6/MM8 Owner's Manual 83