Yamaha MW10 Owner's Manual - Page 22

English Troubleshooting • Are you recording or playing long continuous sections of audio? The audio data processing capabilities of your computer will depend on a number of factors including CPU speed and access to external devices. On Windows computers, changing some settings as outlined below can improve performance. 1 Click [Control Panel] from the [Start] menu, and double click the "Sounds and Audio Devices" icon to open the "Sounds and Audio Devices Properties" dialog. 2 Click the "Volume" tab and click [Advanced] in "Speaker Settings". The "Advanced Audio Properties" dialog will open. 3 Click the "Performance" tab. Set "Hardware Acceleration" to "Full", and "Sample Rate Conversion Quality" to "Good." Don't change these settings if you are not familiar with your computer's operating system. Check that the file system is set properly, and make sure that you have a plenty of free memory (more than 128 MB). If the wave files you are recording or playing are not too large, changing the virtual memory settings can sometimes improve audio performance. In some cases it might be necessary to update your hard disk controller, device drivers, or BIOS. Refer to your computer's support center or support page on the web for more information. • Try adding memory. Adding more RAM memory can significantly increase your computer's audio performance. Refer to your computer's owner's manual for information on installing and setting up extra memory. There is a delay when playing a software synthesizer via a MIDI keyboard (latency). • Check the URL listed below for the latest information. http://www.yamahasynth.com/ 22 MW10 Owner's Manual