Yamaha P-80 Owner's Manual - Page 17
Reverb - p 80 sounds
View all Yamaha P-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Reverb The [REVERB] button selects a number of digital reverb effects that you can use for extra depth and expressive power. To select a reverb type press the [REVERB] button a few times until the indicator corresponding to the desired type lights (the indicators light in sequence each time the [REVERB] button is pressed). No reverb is produced when all indicators are off. OFF No reverb effect is selected when no REVERB indicator is lit. ROOM This setting add a continuous reverb effect to the sound that is similar to the type of acoustic reverberation you would hear in a room. HALL 1 For a "bigger" reverb sound, use the HALL 1 setting. This effect simulates the natural reverberation of a small-size concert hall. HALL 2 For a really spacious reverb sound, use the HALL 2 setting. This effect simulates the natural reverberation of a large concert hall. STAGE A simulation of the type of reverb produced in a stage environment. NOTE • The default reverb type (including OFF) and depth settings are different for each voice. Adjusting Reverb Depth Adjust the reverb depth for the selected voice by using the [-/NOM] and [+/YESL] buttons while holding the [REVERB] button. The depth range is from 0 through 20 (the current depth setting appears on the LED display while the [REVERB] button is held). A setting of "0" produces no effect, while a setting of "20" produces maximum reverb depth. Press the [-/NOM] and [+/YESL] buttons simultaneously while holding the [REVERB] button to recall the default setting for the current voice (default depth settings are different for each voice). ROOM HALL 1 HALL 2 STAGE ROOM HALL 1 HALL 2 STAGE - / NO + / YES 15 P-80 17