Yamaha P-80 Owner's Manual - Page 26

The Function Mode The [FUNCTION] button provides access to a range of functions that give the P-80 extraordinary versatility. The functions are categorized in groups as follows: F1 Tuning 27 F2 Scale 27 F3 Dual Mode Functions 28 F4 Split Mode Functions 29 F5 Sound Board Depth 30 F6 Metronome Volume 31 F7 Preset Song Part Cancel Volume 31 F8 MIDI Functions 32 F9 Backup Functions 35 To Select a Function Z Press the [FUNCTION] button so that its indicator lights. NOTE • Functions cannot be selected during demo/preset song playback or when the user song recorder is in operation. X Use the [TEMPO/FUNCTION# M,L] buttons to select the desired function from F1 through F9. START/ STOP TEMPO/ FUNCTION# FUNCTION START/ STOP TEMPO/ FUNCTION# FUNCTION C In the case of the Scale (F2), Dual Mode (F3), Split Mode (F4), MIDI (F8), and Backup (F9) functions, you will have to press the [+/YESL] button once to enter the respective submode after the function has been selected, and then use the [TEMPO/FUNCTION# M,L] buttons again to select the desired sub-function. NOTE • The Dual or Split mode must be engaged before the F3 and F4 functions can be selected, respectively. If the corresponding mode is not engaged, "F3.-" or "F4.-" will appear on the display and the corresponding sub-mode will not be available. • The Dual mode can be engaged while in the Function mode, but the Function mode must be exited before the Split mode can be engaged. V Set the function as required by using the [-/NOM] and [+/ YESL] buttons (see the individual function descriptions, below). NOTE • After selecting the function, the current setting will be displayed when [-/NOM] or [+/YESL] button is pressed for the first time. B Press the [FUNCTION] button so that its indicator goes out to exit from the function mode. G Operation Example Press [+/YESL] (sub-mode) Use [TEMPO/FUNCTION# t, s] Press [-/NOM] or [+/YESL] once Use [-/NOM], [+/YESL] 24 26 P-80