Yamaha PSR-520 Owner's Manual - Page 82
Backup
View all Yamaha PSR-520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Appendix: Troubleshooting / Data Backup & Initialization PROBLEM The reverb and chorus types can not be changed by changing the registration memory number. Individual registration, song memory, or multi pad data transmitted via bulk dump from an external sequencer or other device is not received by the PSR-520. Cartridge data cannot be selected or cannot be played back correctly. POSSIBLE CAUSE/SOLUTION ACCOMP FREEZE function is turned ON. The reverb and chorus types are memoried as accompaniment parameter. Press the [ACCOMP FREEZE] button to turn OFF it. Transmit the data with no more than a 2-second break between blocks, or transmit as entirely separate data. Make sure that an appropriate Yamaha Music Cartridge is properly plugged into the cartridge slot (page 60) The electrical contacts on the Music Cartridge are affected with dust. Insert and remove the Music Cartridge several times. This may solve the problem. If the problem still happens, wipe and clear the electrical contacts on the Music Cartridge with a dry soft cloth. Appendix: Data Backup & Initialization Except for the data listed below, all PSR-520 panel settings are reset to their initial settings whenever the power is turned ON. The data listed below are backed up - i.e. retained in memory - as long as an AC adaptor is connected or a set of batteries is installed. • Registration Memory data • User Song data • User Pad Kit data • Remote Channel • Keyboard Out • Song Out • Accomp Out • External Clock s Data Initialization ...All data can be initialized and restored to the factory preset condition by turning ON the power while holding the [-/NO] and [+/YES] buttons. "CLr: Backup" will appear briefly on the display. POWER ON / OFF CLr Backup 7 8 9 0 -/NO +/YES • All registration, song and multi pad memory data, plus the other settings listed above, will be erased and/or changed when the data initialization procedure is carried out. • If the PSR-520 has been "locked up" due to static electricity or other causes, turn the PSR-520 OFF and execute the initialize operation. 81