Yamaha PSR-E343 Owner's Manual - Page 11
Using the music rest, Connecting Headphones or External Audio Equipment - set
View all Yamaha PSR-E343 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Setting Up Setting the battery type After installing new batteries and turning the power on, make sure to set the Battery Type appropriately (rechargeable or not) via Function number 042 (page 35). NOTICE • Failure to set the Battery Type may shorten the amount of the battery life. Make sure to set the Battery Type correctly. NOTICE • When the instrument's sound is output to an external device, first turn on the power to the instrument, then to the external device. Reverse this order when you turn the power off. Connecting a Footswitch to the SUSTAIN jack Using the music rest Insert the music rest into the slots as shown. Connecting Headphones or External Audio Equipment Any pair of stereo headphones with a 1/4" stereo phone plug can be plugged in here for convenient monitoring. The speakers are automatically shut off when a plug is inserted into this jack. The PHONES/OUTPUT jack also functions as an external output. You can connect the PHONES/OUTPUT jack to a keyboard amplifier, stereo system, mixer, tape recorder, or other line-level audio device to send the instrument's output signal to that device. CAUTION • Do not use the instrument/device or headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician. • Before connecting the instrument to other electronic components, set all volume levels to the minimum, then turn off the power for all components. You can produce a natural sustain as you play by pressing an optional Footswitch plugged into the [SUSTAIN] jack. NOTE • The sustain function does not affect split voices (page 15). • Make sure that the footswitch plug is properly connected to the SUSTAIN jack before turning on the power. • Do not press the footswitch while turning the power on. Doing this changes the recognized polarity of the footswitch, resulting in reversed footswitch operation. Turning the Power On/Off Turn down the [MASTER VOLUME] control to "MIN" then press the [ ] (Standby/On) switch to turn on the power. While playing the keyboard, adjust the [MASTER VOLUME] control. To turn off the power, press the [ ] (Standby/On) switch again for a second. While playing the keyboard, use the [MASTER VOLUME] control to adjust the volume to an appropriate level. CAUTION • When using a power adaptor, even when the power is off, a small amount of electricity is still being consumed by the instrument. When you are not using the instrument for a long time, make sure to unplug the AC power adaptor from the wall AC outlet. PSR-E343/YPT-340 Owner's Manual 11