Yamaha Pocketrak C24 Owners Manual - Page 10
Attaching the mounting clip, side of the recorder, and pulling
View all Yamaha Pocketrak C24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Introduction ■ Attaching the mounting clip You can attach the recorder to a microphone stand or music stand using the included mounting clip. 1. Open the USB plug compartment cover by inserting the tip of your fingernail in the groove between the cover and the side of the recorder, and pulling the cover out. The pivotal projection rotates 360 degrees so that you can position the recorder at any angle. 2. Leave the USB plug inside the compart- ment as it is, and insert the pivotal projection on the mounting clip into the USB plug compartment. CAUTION · Be sure to insert the projec- tion all the way firmly, with the USB plug retracted into the compartment. Otherwise, the recorder may detach from the mounting clip. 10 POCKETRAK C24 Owner's Manual CAUTION · Do not apply force to the recorder or mounting clip. Do not rotate the recorder or mounting clip unnecessarily or excessively. Otherwise, damage to the mounting clip and/or injury to you or other people may occur. 3. While holding the USB plug slide switch at the top position, remove the recorder from the mounting clip. Note: · When you remove the recorder from the mount- ing clip, the USB plug may pop out of the compartment. In this case, move the USB plug slide switch toward the top (toward the built-in microphone) to retract the USB plug. · The mounting clip is dedicated to the POCKETRAK C24. Do not use it for other USB devices. · If you attach the mounting clip to a music stand, mount the clip onto the stand all the way firmly. · Be sure to avoid touching the joint part where the lubricant is applied.