Yamaha Pocketrak C24 Owners Manual - Page 30

Using the Recorder with a Computer Connecting the recorder to your computer 1. Open the USB plug compartment cover, then move the USB plug slide switch toward the bottom (in the direction of the arrow) so that the USB plug will pop out. 2. Make sure the recorder is turned off, and then connect the USB plug to the USB terminal on the computer. If nothing appears on the computer display, follow the steps below: • Exit (quit) all running applications. • Disconnect all external USB devices (excluding a properly working mouse and keyboard), then connect only the recorder. • If the computer features multiple USB terminals, use a different USB terminal to connect the recorder. • If the recorder is connected via a bus-powered USB hub, remove the hub, then connect the recorder directly to the computer's USB terminal. Precautions when using the USB plug Be sure to observe the following points when connecting to the computer's USB interface. If you do not observe these points, you risk freezing the computer, corrupting the data, and losing the data. If the computer or the recorder freezes, restart the application software such as Windows Media Player or OS. • Never disconnect the USB plug while data is being transferred. • Be sure to wake the computer from sleep/ suspended/standby mode before making a connection to the computer's USB terminal. • Quit all applications running on the computer before connecting or disconnecting the USB plug. About the AutoPlay dialog box If the system displays the AutoPlay dialog box when you connect the recorder to the computer, click to select [Open folder to view files], then click [OK]. The system will display the recorder's folders. 1 Select 2 Click 30 POCKETRAK C24 Owner's Manual