Yamaha Pocketrak C24 Owners Manual - Page 15

Inserting a microSD card Besides the internal 2GB memory, you can use a commercially-available microSD card for recording and playback. You must format commercially-available microSD cards before you can use them for the first time (see page 26, PDF reference manual). 1. Turn off the power to the recorder, then open the microSD card slot cover. 2. Insert the card straight, in the direction shown in the illustration, until it clicks. 3. Close the card slot cover. 4. Turn the power on. " " appears on the LCD. Note: · If the recorder does not recognize the card, remove the card, then insert the card again. · The recorder may not recognize certain microSD cards formatted by other devices, such as a computer. Be sure to format the card using the recorder (See page 26, PDF reference manual). To remove the card, open the slot cover and push in the card gently. The card will be ejected slightly. Pull out the card carefully. Introduction About microSD cards If you plan to use a microSD card, choose a 1GB - 2GB microSD card, or a 4GB - 16GB microSDHC card (these cards are compatible as of October 2009). However, some cards (depending on the manufacturer or type of card) may not work with the recorder. For more information about microSD cards, please visit the following Yamaha website: http://www.yamahasynth.com/ Before using the microSD card • Make sure that you insert the microSD card in the recorder correctly. Otherwise, the recorder will not record to or play from the microSD card. • Do not apply too much force when you insert or remove the microSD card. Otherwise, you might injure your hand or finger or damage the card. • If you insert the microSD card in the wrong orientation or upside down, the microSD card and/or the card slot may be damaged. • If the recorder does not recognize the installed microSD card when the power to the unit is turned on, first turn off the power, remove the card, insert the card correctly, then turn the power on. • Do not install or remove the microSD card while the power to the unit is on. Otherwise, the data on the microSD card may be damaged. • Do not touch the terminal on the microSD card or expose the card to water or dirt. • Do not try to bend, fold or place a heavy object on the microSD card. • Do not use or keep the microSD card in a location subject to static electricity or electric noise. • Do not place the microSD card in the vicinity of corrosive chemicals or corrosive gas. • Otherwise, the card may malfunction or data on the card may be lost. • Never place the microSD card within reach of small children. A child may swallow the card accidentally. • If you discard the microSD card without precautions, important or personal data that remains on the card may become accessible to unauthorized individuals. To avoid this risk, erase all data on the card, destroy the card physically, then discard it. POCKETRAK C24 Owner's Manual 15