Yamaha QY70 Data Filer - Page 25
Data transfer is not possible in the QY70's current - manual
View all Yamaha QY70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
, E r r o r M e s s a g e s • Is the device properly set up? Follow the steps in the "About the Device Setup" section on page 8 and confirm that the proper MIDI driver is selected. s "Data transfer interrupted. Confirm QY70 connections" Confirm the following points, switch the QY70's power off, then on again, and try the operation once again. • Is the QY70's AC adaptor connected? Follow the instructions on page 11 in the "Owner's Manual" and make the proper connections. • Is the QY70's POWER switch turned OFF? Switch the POWER ON. • Is battery power low? Replace the old batteries with a fresh set of batteries. • Is the QY70 property connected to the computer? Follow the instructions on page 16 in the "Owner's Manual" and make the proper connections. • Is the QY70's HOST SELECT switch properly set? Follow the instructions on page 17 in the "Owner's Manual" and make the proper settings. s "Data transfer is not possible in the QY70's current mode. Press the [EXIT] button, etc., and set the QY70 to a mode that allows data transfer." Confirm the following points and try the operation again. • Is the QY70 currently showing the SONG play mode/ PATTERN play mode display? Return to the SONG play mode/PATTERN play mode display. • Is the QY70 currently in the middle of Recording, Playback or, in Record Standby? Press the QY70's [A] button, and stop play or record operations. 23