Yamaha R-S201 Owners Manual - Page 15

PREPARATION Connecting the FM and AM antennas Indoor antennas for receiving FM and AM broadcasts are included with this unit. In general, these antennas should provide sufficient signal strength. Connect each antenna correctly to the designated terminals. Note If you experience poor reception quality, install an outdoor antenna. Consult the nearest authorized Yamaha dealer or service center about outdoor antennas. Outdoor FM antenna Outdoor AM antenna* CONNECTIONS ■ Assembling the supplied AM loop antenna ■ Connecting the wire of the AM loop antenna Indoor FM antenna (included) AM loop antenna (included)** Connecting power cable Plug the power cable into an AC wall outlet after all other connections are complete. CAUTION Only for General model: Before connecting the power cable, make sure you set VOLTAGE SELECTOR of this unit according to your local voltage. Improper setting of VOLTAGE SELECTOR may cause fire and damage to this unit. *Outdoor AM antenna Use 5 to 10 m of vinyl-covered wire extended outdoors from a window. **AM loop antenna (included) • The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit. • The AM loop antenna should be placed away from this unit. • The wires of the AM antenna have no polarity. To the AC wall outlet with the power cable English 11 En