Yamaha R-S201 Owners Manual - Page 18
FM/AM TUNING, Using preset functions
View all Yamaha R-S201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
FM/AM TUNING Notes • The radio frequencies differ depending on the country or region where this unit is being used. Front panel display illustrations shown in this section are based on Europe model. • Only for Asia and General models: Be sure to set the tuner frequency step according to the frequency spacing in your area before you tune into a radio station (see page 19). Using preset functions TUNING jj / ii FM/AM 1 Press FM/AM to select TUNER as the input source and select the band. 2 Press and hold TUNING jj / ii to begin tuning. Press ii to tune in to a higher frequency. Press jj to tune in to a lower frequency. When this unit tunes in to a station, the TUNED indicator lights up on the front panel display. You can register up to 40 radio stations as presets. Once you have registered stations, you can easily tune in to them by recalling the presets. ■ Presetting stations automatically (FM stations only) You can automatically register FM stations that have strong signals. Notes • If a station is registered to a preset number that already has a station registered to it, the previously registered station is overwritten. • If the station you want to store is weak in signal strength, press TUNING jj / ii repeatedly to tune in to the desired station. • Only for Europe model: Only Radio Data System broadcasting stations can be preset automatically. y FM stations registered as presets using the automatic preset registration feature will be heard in stereo. Note If the tuning search does not stop at the desired station because the station signals are weak, press TUNING jj / ii repeatedly to tune in to the desired station. y You can also use the buttons on the front panel if they have the same or similar names as those on the remote control. ■ Improving FM reception If the signal from the station is weak and the sound quality is not good, set the FM band reception mode to monaural mode to improve reception. Front panel Press FM MODE, and then make sure the ST indicator is turned off (see page 4). Remote control Enter FM MODE from the Option menu to select MONO (monaural mode) (see page 19). 14 En B / C / D ENTER MENU FM PRESET j / i