Yamaha R-V703 Owner's Manual - Page 18

E MEMORY (MAN'L/AUTO FM) button When this button is pressed, the "MEMORY" indicator flashes for about 5 seconds. During this period, select a desired preset station number by pressing the corresponding preset station number selector button to enter the displayed station into the memory. When this button is pressed and held for about 3 seconds, the automatic preset tuning begins. (For details, refer to page 31.) F EDIT button This button is used to exchange the places of two preset stations with each other. G TUNING DOWN/UP button Used for tuning. Press the "UP" side to tune in to higher frequencies, and press the "DOWN" side to tune in to lower frequencies. H TUNING MODE (AUTO/MAN'L MONO) button Press this button to switch the tuning mode to automatic or manual. To select the automatic tuning mode, press this button so that the "AUTO" indicator lights up on the display. To select the manual tuning mode, press this button so that the "AUTO" indicator goes off. I DELAY/CENTER/REAR/SWFR and TIME/LEVEL +/- buttons R-V703 only Adjust the delay time (DELAY), the center channel output level (CENTER), the rear channel output level (REAR) and the output level to the SUBWOOFER OUTPUT terminal (SWFR). Select the item which you want to adjust by pressing the DELAY/CENTER/REAR/SWFR button and adjust its time or level by pressing the TIME/LEVEL +/- button. J CENTER MODE button Selects a center channel output mode (NORMAL, WIDE or PHANTOM). (For details, refer to page 23.) K PROGRAM selector button R-V503 only When the built-in digital sound field processor (including the Dolby Pro Logic Surround decoder) is on, this button changes the currently selected DSP program whenever the right or left side of this button is pressed. L CENTER LEVEL control R-V703 only Adjusts the sound output level of the center speaker. M REAR LEVEL control R-V503 only Adjusts the sound output level of the rear speakers. 18