Yamaha RX-10 Owner's Manual - Page 8
Basic Operations
View all Yamaha RX-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
BASIC OPERATIONS 2 3 1, 6 2 3 1, 6 4 7 To play a source 1 VOLUME 0 l0 Set to the "0" position. 2 Turn the power on. POWER Power indicator Lights up. PURE DIRECT 4 7 4 Select the speakers to be used. SPEAKERS A ON OFF B * If you use two speaker systems, press both the A and B switches. 5 Play the source. (For detailed information on the tuning operations, refer to the page 11.) 6 VOLUME 3 Select a desired input source. INPUT AUX/TAPE 2/TAPE 1/CD/TUNER/PHONO * The name of the selected input source will appear on the display. To turn off the power Press the POWER switch again. 0 l0 Adjust to the desired output level. 7 If desired, adjust the BASS, TREBLE, BALANCE controls and PURE DIRECT switch. (Refer to page 10.) Note When listening to a source sound, make sure that "TAPE MONITOR 2" is not illuminated on the display. If it is illuminated, press the TAPE 2 MONITOR button to turn it off. 8