Yamaha RX 397 MCXSP10 Manual - Page 22

PLAYING AND RECORDING Using the SLEEP timer Use this feature to automatically set this unit to the standby mode after a certain amount of time. The SLEEP timer is useful when you are going to sleep while this unit is playing or recording a source. The SLEEP timer also automatically turns off any external components connected to the AC OUTLETS. 3 1 SLEEP POWER CD/DVD PHONO TUNER STANDBY MD TAPE AUX SPEAKERS A B u PRESET d A/B/C/D/E + VOLUME - MUTE 4 Press SLEEP repeatedly so that SLEEP OFF appears in the front panel display. SLEEP After a few seconds, SLEEP OFF disappears from the front panel display, and the SLEEP indicator turns off. y The sleep timer setting can also be canceled by pressing STANDBY on the remote control (or STANDBY/ON on the front panel) to set this unit to the standby mode. Note The SLEEP timer can only be set with the remote control. 1 Press one of the input selector buttons on the remote control to select an input source. SLEEP POWER CD/DVD PHONO TUNER STANDBY MD TAPE AUX SPEAKERS A B 2 Start playback on the selected input source. 3 Press SLEEP repeatedly to set the amount of time before this unit is set to the standby mode. Each time you press SLEEP, the front panel display changes as shown below. SLEEP SLEEP 120 min SLEEP 90 min SLEEP OFF SLEEP 30 min SLEEP 60 min The SLEEP indicator flashes while switching the amount of time for the sleep timer. SLEEP 18