Yamaha RX-777 Owner's Manual - Page 12

ZONE 2 CONNECTIONS You can make up a multi-room audio-video system with this unit. This feature enables you to set this unit to reproduce separate input sources in the main room and second room (Zone 2) with the supplied remote control in the second room. To use the multi-room functions of this unit, you need the following additional equipment: • An infrared signal receiver in the second room • An infrared emitter in the main room This emitter transmits the infrared signals from the remote control in the second room to the main room (for example, to a CD player or LD player). • An amplifier and speakers for the second room • A video monitor for the second room y • Since there are so many ways to connect and use this unit in a multi-room installation, we recommend that you consult with the nearest authorized YAMAHA dealer or service center for the Zone 2 connections which will best meet your requirements. REMOTE CONTROL • Some YAMAHA models are able to connect directly OUT IN OUT IN OUT IN to the REMOTE CONTROL OUT terminal of this unit. If you own these products, you may not need to This unit use an infrared emitter. Up to 6 YAMAHA components can be connected as shown. s Example of a system configuration and connections Main room DVD player (or other component) This unit Infrared emitter ZONE 2 VIDEO OUT ZONE 2 AUDIO OUT Second room Amplifier Video monitor Remote control (in the Zone 2 mode) Infrared signal receiver REMOTE CONTROL OUT REMOTE CONTROL IN E-8