Yamaha RX 797 Owners Manual - Page 19
Connecting the AM loop antenna, Release the tab.
UPC - 027108923833
View all Yamaha RX 797 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
PREPARATION ■ Connecting the AM loop antenna 1 Set up the AM loop antenna. CONNECTIONS 5 Repeat steps 2 to 4 to insert the AM loop antenna lead wires into the GND terminal. 6 Orient the AM loop antenna for the best reception. 2 Press and hold the tab. 3 Insert the AM loop antenna lead wires into the AM ANT terminal. Notes • The AM loop antenna should be placed away from this unit. • A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. It is recommended that you should connect a 5 to 10 m of vinyl-covered wire to the AM ANT terminal and extend it outdoors from a window. Consult your nearest authorized YAMAHA dealer or service center about outdoor antennas. • The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit. 4 Release the tab. 15