Yamaha RX 797 Owners Manual - Page 53

SPECIFICATIONS SPECIFICATIONS AUDIO SECTION • Minimum RMS Output Power (8 Ω , 20 Hz to 20 kHz, 0.019% THD 100 W + 100 W (6 Ω , 20 Hz to 20 kHz, 0.03% THD 120 W + 120 W • Dynamic Power (IHF) (8/6/4/2 140/170/220/290 W • Maximum Output Power [Europe model only] (1 kHz, 0.7% THD, 4 160 W • IEC Output Power [Europe model only] (1 kHz, 0.019% THD, 8 115 W • Power Band Width (0.03% THD, 50 W, 8 10 Hz to 50 kHz • Damping Factor (SPEAKERS A) 20 Hz to 20 kHz, 8 240 or more • Maximum Output Power (EIAJ) [Asia, General, China and Korea models only] (1 kHz, 10% THD, 8/6 145/170 W • Maximum Input Signal PHONO (1 kHz, 0.019% THD 70 mV or more CD, etc. (1 kHz, 0.019% THD 2.2 V or more • Frequency Response CD, etc. (20 Hz to 20 kHz 0 ± 0.5 dB CD DIRECT AMP, etc. (10 Hz to 100 kHz 0 ± 1.0 dB • RIAA Equalization Deviation PHONO 0.5 dB • Total Harmonic Distortion PHONO to OUT (REC) (20 Hz to 20 kHz, 3 V 0.008% or less CD, etc. to SP OUT (20 Hz to 20 kHz, 50 W, 8 0.012% or less • Signal to Noise Ratio (IHF-A Network) PHONO (5 mV input shorted 87 dB or more CD DIRECT AMP (200 mV input shorted) ..........110 dB or more • Residual Noise (IHF-A Network) CD DIRECT AMP ON 30 µV PURE DIRECT ON 110 µV • Gain Tracking Error (0 to -60 dB 2 dB or less • Input Sensitivity/Input Impedance PHONO 2.5 mV/47 kΩ CD, etc 200 mV/47 kΩ MAIN IN 1 V/30 kΩ • Output Level/Output Impedance OUT (REC 200 mV/1.2 kΩ or less PRE OUT 1 V/1.2 kΩ SUB WOOFER OUTPUT 4 V/1.2 kΩ ZONE 2 OUT 1 V/1.2 kΩ • Headphone Output/Impedance (Input 1 kHz, 150 mV, 8 Ω , 0.015% THD) CD, etc 0.47 V/470 Ω • Channel Separation CD, etc. (5.1 kΩ input shorted, 1/10 kHz) ........ 65/50 dB or more • Tone Control Characteristics BASS Boost/Cut (20 Hz 10 dB Turnover Frequency 350 Hz TREBLE Boost/Cut (20 kHz 10 dB Turnover Frequency 3.5 kHz • Continuous Loudness Control Attenuation (1 kHz 30 dB VIDEO SECTION • Video Signal Type [U.S.A., Canada and General models NTSC [Other models PAL • Signal to Noise Ratio 50 dB or more • Frequency Response (MONITOR OUT) Composite 5 Hz to 10 MHz, -3 dB FM SECTION • Tuning Range [U.S.A. and Canada models 87.5 to 107.9 MHz [Asia and General models] ........ 87.5/87.50 to 107.9/108.00 MHz [Other models 87.50 to 108.00 MHz • Usable Sensitivity (IHF 1.0 µV (11.2 dBf) • Signal to Noise Ratio (IHF) Mono/Stereo 76 dB/70 dB • Harmonic Distortion (1 kHz) Mono/Stereo 0.2%/0.3% • Stereo Separation (1 kHz 45 dB • Frequency Response 20 Hz to 15 kHz, +0.5/-2 dB AM SECTION • Tuning Range [U.S.A. and Canada models 530 to 1710 kHz [Asia and General models 530/531 to 1710/1611 kHz [Other models 531 to 1611 kHz • Usable Sensitivity 300 µV/m GENERAL • Power Supply [U.S.A. and Canada models AC 120 V, 60 Hz [Asia model AC 220/230-240 V, 50/60 Hz [General model AC 110/120/220/230-240 V, 50/60 Hz [Australia model AC 240 V, 50 Hz [Europe model AC 230 V, 50 Hz • Power Consumption [U.S.A. and Canada models 260 W, 360 VA [Other models 260 W • Standby Power Consumption 0.1 W • Maximum Power Consumption [General model only] (6 Ω , 1 kHz, 10% THD 650 W • AC Outlets [Australia model 1 (Total 100 W maximum) [General model 2 (Total 50 W maximum) [Other models 2 (Total 100 W maximum) • Dimensions (W x H x D 435 x 151 x 389 mm (17-1/8" x 5-15/16" x 15-5/16") • Weight 10.9 kg (24 lbs.) * Specifications are subject to change without notice. ADDITIONAL INFORMATION 49