Yamaha RX-A2070 RX-A3070/RX-A2070 Owners Manual - Page 113
Preparing the multi zone system
View all Yamaha RX-A2070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Preparing the multi zone system Connect the device that will be used in other rooms to the unit. Caution • Remove the unit's power cable from the AC wall outlet before connecting speakers or an external amplifier. • Ensure that the bare wires of the speaker cable do not touch one another or come into contact with the unit's metal parts. Doing so may damage the unit or the speakers. If the speaker cables short circuit, "Check SP Wires" will appear on the front display when the unit is turned on. ■ Connecting speakers to play back audio Connect speakers to play back audio in Zone2 or Zone3. The connection method varies depending on the amplifier being used (the unit or an external amplifier). Using the unit's internal amplifier Connect the speakers placed in Zone2 or Zone3 to the unit with speaker cables. For details, see "Connecting Zone2/3 speakers" (p.39). Using an external amplifier Connect the external amplifier placed in Zone2 or Zone3 to the unit with a stereo pin cable and connect speakers to the external amplifier. The unit (rear) HDMI OUT (HDCP2.2) 2 1 (ZONE OUT) ARC AV 1 (1 BD/DVD) AV 2 AV 3 HDMI (HDCP2.2) AV 4 AV 1 AV 2 (1 BD/DVD) AV 3 AV 4 COMPONENT VIDEO Y AV 1 PB PR A ZONE OUT (ZONE 2 or ZONE 3) jacks VIDEO ZONE OUT/PRE OUT AUDIO 2 AUDIO 3 L B Y AV 2 PB PR ZONE OUT/PRE OUT PRE OUT (SINGLE) (F L R R 2 OPTICAL 3 COAXIAL 4 COAXIAL 5 COAXIAL 6 OPTICAL ZONE 2/ ZONE 3/ F.PRESENCE R.PRESENCE FRONT SURROUND SUR. BACK (R SUB DIO 4 ANTENNA L (4 RADIO) 75ȍ FM AM R SURROUND L R SURROUND ZONE 2 / ZONE 3 / F.PRESENSE R.PRESENSE External amplifier Audio input (analog stereo) L R AUDIO Zone2 or Zone3 Main zone Y (RX-A3070 only) You cannot use an external amplifier for Zone2 when the ZONE OUT/PRE OUT jacks are set to output front presence channel audio in "Power Amp Assign" (p.142) in the "Setup" menu. Also, you cannot use an external amplifier for Zone3 when the ZONE OUT/PRE OUT jacks are configured to output rear presence channel audio. X You can adjust the volume for Zone2 and Zone3 output with the unit. When using an external amplifier with volume control, set "Volume" (p.156) in the "Setup" menu to "Fixed". En 113