Yamaha RX-A2070 RX-A3070/RX-A2070 Owners Manual - Page 46
Connecting audio devices such as CD players
View all Yamaha RX-A2070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Connecting audio devices (such as CD players) Connect audio devices such as CD players and a turntable to the unit. Depending on the audio output jacks available on your audio device, choose one of the following connections. Y • The following explanation is based on the assumption that you have not changed the "Input Assignment" setting (p.158) in the "Setup" menu. As necessary, you can assign the COAXIAL (3, 4, 5) and OPTICAL (1, 2, 6) jacks to another input source. • (RX-A3070 only) Before connecting XLR balanced cables, refer to the instruction manual of your audio device and verify that its XLR jacks are compatible with the pin assignments of the unit (p.42). X If you make more than one audio connection for one input source, an audio signal played back on the unit will be determined according to the "Audio Select" setting (p.128) in the "Option" menu. Audio output jacks on audio device Digital coaxial Digital optical Analog stereo (RCA) Analog stereo (XLR) Turntable (PHONO) Audio input jacks on the unit AV 1-2 (COAXIAL) AUDIO 3 (COAXIAL) AV 3 (OPTICAL) AUDIO 1-2 (OPTICAL) AV 1-4 (AUDIO [RCA]) AUDIO 1-3 (AUDIO [RCA]) AUDIO 4 (AUDIO [XLR]) (RX-A3070 only) PHONO PHONO jacks PHONO L L R R The unit (rear) GND HDMI OUT (HDCP2.2) 2 1 (ZONE OUT) ARC AV 1 (1 BD/DVD) AV 2 AV 1 AV 2 (1 BD/DVD) AV 3 AV 4 COMPONENT VIDEO Y AV 1 PB PR A VIDEO PHONO L AUDIO 1 (2 TV) AUDIO 2 AUDIO 3 L B Y AV 2 PB PR ZONE OUT/PRE OUT R R GND 1 OPTICAL 2 OPTICAL 3 COAXIAL 4 COAXIAL 5 COAXIAL 6 OPTICAL ZONE 2/ ZONE 3/ F.PRESENCE R.PRESENCE FRONT R SURROUND L AUDIO 4 ANTENNA R L (4 RADIO) 75ȍ FM AM Ground lead Audio output (PHONO) PHONO L L R R GND C O L R C O L R COAXIAL OPTICAL L R Turntable Audio device XLR XLR XLR XLR Any of AV 1-4, AUDIO 1-4 (COAXIAL, OPTICAL, AUDIO [RCA], AUDIO [XLR]) jacks Audio output (any of digital coaxial, digital optical, analog stereo) If you select the input source by pressing AV 1-4, AUDIO 1-4 or PHONO on the remote control, the audio played back on the audio device will be output from the unit. * AUDIO 4 (AUDIO [XLR]) jack: RX-A3070 only When connecting a turntable • The PHONO jack of the unit is compatible with an MM cartridge. To connect a turntable with a low-output MC cartridge, use a boosting transformer. • Connecting the turntable to the GND terminal of the unit may reduce noise in the signal. En 46