Yamaha RX-A810 RX-A810 Manual USA Model - Page 117
FM/AM radio, USB and network, Radio stations cannot be selected
View all Yamaha RX-A810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
FM/AM radio Problem FM radio reception is weak or noisy. AM radio reception is weak or noisy. Radio stations cannot be selected automatically. Cause There is multi-path interference. Your area is too far from the FM station transmitter. The noises may be caused by fluorescent lamps, motors, thermostats, or other electrical equipment. Your area is too far from the FM station transmitter. The AM radio signal is weak. AM radio stations cannot be registered as presets. "Auto Preset" has been used. Remedy Adjust the FM antenna height or orientation, or place it in a different location. Press MODE to select monaural FM radio reception (p.48). Use an outdoor FM antenna commercially available. We recommend using a sensitive multi-element antenna. It is difficult to completely eliminate noise. It may be reduced by using an outdoor AM antenna commercially available. Select the station manually (p.48). Use an outdoor antenna commercially available. We recommend using a sensitive multi-element antenna. Adjust the AM antenna orientation. Select the station manually (p.48). Use an outdoor AM antenna commercially available. Connect it to the ANTENNA (AM) jack together with the supplied AM antenna. "Auto Preset" is for registering FM radio stations only. Register AM radio stations manually (p.48). USB and network Problem This unit does not detect the USB device. Folders and files in the USB device cannot be viewed. The network feature does not function. This unit does not detect the PC. Cause Remedy The USB cable connecting this unit and USB device is not compliant with USB 2.0. Use a USB cable compliant with USB 2.0. The folder structure not supported by this unit is applied. This unit supports folder hierarchies of up to 8 levels and up to 500 items (total of files and subfolders) per folder. If necessary, modify the folder structure on your USB device. The network parameters (IP address) is not obtained properly. Enable the DHCP server function on your router and set "DHCP" in the "Setup" menu to "On" on this unit (p.100). If you want to configure the network parameters manually, make sure using an IP address which is not used by other network devices in your network (p.100). The media sharing setting is not correct. Configure the sharing setting and select this unit as a device to which music contents are shared (p.67). Some security software installed on your PC is blocking the access of this unit to your PC. Check the settings of security software installed on your PC. This unit and PC are not in the same network. Check the network connections and the settings of your router to connect them to the same network. En 117