Yamaha RX-A810 RX-A810 Manual USA Model - Page 96
Level, Parametric EQ, Test Tone, PEQ Select, PEQ Data Copy
View all Yamaha RX-A810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
■ Level Adjusts the volume of each speaker. Choices Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front Presence R, Subwoofer Setting range -10.0dB ~ +10.0dB (0.5dB steps) Default 0.0dB ■ Parametric EQ Adjusts sound quality of tone with an equalizer. ❑ PEQ Select Selects a type of equalizer to be used. Settings Manual YPAO:Flat Select this when you want to adjust the equalizer manually. For details, see "Manual equalizer adjustment". Adjusts individual speakers to achieve the same characteristics. YPAO:Front YPAO:Natural Adjusts individual speakers to achieve the characteristics same as the front speakers. Adjusts all speakers to achieve a natural sound. Through Does not use the equalizer. • "YPAO:Flat", "YPAO:Front" and "YPAO:Natural" are available only when the measurement results of "Auto Setup" have already been saved (p.34). ❑ PEQ Data Copy Copies the parametric equalizer values acquired with "Auto Setup" (p.34) to the "Manual" fields for fine adjustment. Choices Flat > Manual Copies the "Flat" values acquired with "Auto Setup". Front > Manual Copies the "Front" values acquired with "Auto Setup". Natural > Manual Copies the "Natural" values acquired with "Auto Setup". ■ Manual equalizer adjustment 1 Set "PEQ Select" to "Manual" and press ENTER. 2 Use the cursor keys to select a speaker and press ENTER. 3 Use the cursor keys to select an item and press ENTER. Band / Gain: You can select a center frequency from the preset 7 bands and adjust the gain. Freq. / Gain: You can adjust the center frequency of the selected band and adjust the gain. Q / Gain: You can adjust the Q factor (bandwidth) of the selected band and adjust the gain. Clear: Restores the default settings for the selected speaker. 4 Use the cursor keys to adjust parameters and press ENTER. Setting range Gain: -20.0dB ~ +6.0dB (0.5dB steps) Center frequency: 31.3Hz ~ 16.0kHz Q factor: 0.500 ~ 10.08 5 To exit from the menu, press ON SCREEN. ■ Test Tone Enables/disabled the test tone output. Test tone output helps you to adjust the speaker balance or equalizer while confirming its effect. Settings Off (default) Does not output test tones. On Outputs test tones automatically when you adjust the speaker balance, equalizer, etc. En 96