Yamaha RX-A810 RX-A810 Manual USA Model - Page 30

1 2 3 4 5 6 Network connections 7 8 9 6 Connecting to the network Connect this unit to your router with a commercially-available STP network cable (CAT-5 or higher straight cable). You can enjoy Internet radio or music files stored on PCs and DLNA servers such as Network Attached Storage (NAS) on this unit. Internet WAN LAN Modem Network Attached Storage (NAS) PC • Some security software installed on your PC or the firewall settings of your network devices (such as a router) may block the access of this unit to the network devices or the Internet. In such cases, configure the security software or firewall settings appropriately. • You can connect this unit to up to 16 music servers (PC, etc.), and each server must be connected to the same subnet as this unit. • To use the service via the Internet, broadband connection is strongly recommended. Router Network cable DOCK NETWORK SIRIUS COMPONENT VIDEO PR PB VIDEO Y L HDMI OUT 1 2 ARC HDMI 1 (BD/DVD) HDMI 2 ANTENNA AM FM COMPONENT VIDEO PR R REMOTE IN 75Ω PB OUT VIDEO Y MONITOR OUT +12V 0.1A MAX. TRIGGER OUT R OPTICAL AV 1 COAXIAL AV 2 COAXIAL (CD) AV 3 OPTICAL (TV) AV 4 AV 5 AV 6 AV OUT AUDIO 1 AUDIO 2 This unit (rear) • When using a router that supports the DHCP function, the network parameters (IP address, etc.) will be automatically assigned to this unit without configuring the network settings of this unit. If your router does not support the DHCP function or you want to configure the network parameters manually, configure the network settings (p.100). • You can check whether the network parameters (IP address, etc.) are properly assigned to this unit in "Network" (p.105) in the "Information". En 30