Yamaha RX V361 MCXSP10 Manual - Page 63

■ Tuner Troubleshooting Problem Cause Remedy FM stereo reception is noisy. The characteristics of FM stereo broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor. Check the antenna connections. Try using a high-quality directional FM antenna. Use the manual tuning method. There is distortion, and There is multi-path interference. clear reception cannot FM be obtained even with a good FM antenna. Adjust the antenna position to eliminate multi-path interference. The desired station cannot be tuned into with the automatic tuning method. The signal is too weak. Use a high-quality directional FM antenna. Use the manual tuning method. Previously preset stations can no longer be tuned into. This unit has been disconnected for a long period. Set preset stations. The desired station cannot be tuned into with the automatic tuning method. The signal is weak or the antenna connections are loose. Tighten the AM loop antenna connections and orient it for the best reception. Use the manual tuning method. AM There are continuous crackling and hissing noises. Noises result from lightning, fluorescent lamps, motors, thermostats and other electrical equipment. Use an outdoor antenna and a ground wire. This will help somewhat, but it is difficult to eliminate all noise. There are buzzing and whining noises. A TV set is being used nearby. Move this unit away from the TV set. See page 18 - 34 - - 34 35 - 34 - - ■ XM Satellite Radio (U.S.A. and Canada models only) If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel display. In this case, read the cause and follow the corresponding remedies. Status message CHECK ANTENNA UPDATING NO SIGNAL LOADING OFF AIR - - - Cause Remedy The XM Mini-Tuner and XM Dock are not connected to the XM jack of this unit or do not work properly. Check XM Mini-Tuner and XM Dock connections and orient for the best reception level. The XM user encryption code is being updated. Wait until the encryption code is updated. The signal is too weak. Adjust the orientation of the XM Mini-Tuner for the best reception level. It takes longer than four seconds for audio Wait until the decoding process has finished. or text data to be decoded. The XM Satellite Radio channel you selected is not currently broadcasting any signals. Check the channel number again or select another XM Satellite Radio channel. The Channel Station ID (SID) is no longer available. No artist name or song title is available. No channels are available for the selected Select another channel category by pressing category. 4CATEGORY (or GA-E/CAT. l / h) repeatedly. See page 37 - 37 - - 39 ADDITIONAL INFORMATION English 59 En