Yamaha RX-V383 RX-V383 Owner s Manual - Page 43
Playback of Bluetooth® device contents, Enjoying audio using Bluetooth® speakers, headphones
View all Yamaha RX-V383 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Playback of Bluetooth® device contents Connect a paired Bluetooth device and start playback. Check the following beforehand: • Pairing has been completed. • Bluetooth function on the Bluetooth device is turned on. 1 Operate the Bluetooth device to establish a Bluetooth connection. Select the model name of the unit from the Bluetooth device list on your device. When a connection is established, the unit's input source automatically switches to "Bluetooth". Note ▪ If you do not want the input source to switch automatically when a connection is established, set "Input Interlock" (p.47) to "Off" in the "Option" menu. ▪ You can operate the unit to search and connect the Bluetooth device (only the most recently connected device). In that case, follow one of the procedures below. - Switch the input source to "Bluetooth". - Press ENTER while the input source is "Bluetooth". Otherwise, press OPTION and use the cursor keys to select "Connect". ▪ If you cannot connect the device, please perform pairing again. 2 Operate the Bluetooth device to play back music. Note ▪ You cannot operate the unit to select or play back music, or display informations such as song names. ▪ Follow one of the procedures below to disconnect a Bluetooth connection. - Perform the disconnect operation on the Bluetooth device. - Press ENTER. - Press OPTION and use the cursor keys to select "Disconnect". - Switch the unit's input source to other than "Bluetooth". - Press the SETUP key, then use the cursor keys to select "Bluetooth", then "Disconnect". Enjoying audio using Bluetooth® speakers/ headphones Follow the procedure below to establish a Bluetooth connection between Bluetooth speakers/headphones and the unit. 1 Use the input selection keys on the remote control to select an input source. Select an input source other than Bluetooth. 2 Press SETUP. 3 Use the cursor keys to select "Bluetooth" and press ENTER. 4 Use the cursor keys to set "Bluetooth" to "On", and then set "Transmitter" to "On" in the same way. 5 Use the cursor keys to select "Device Search" to search the Bluetooth devices. The list of Bluetooth devices is displayed. 6 Select the Bluetooth speakers/headphones to be connected with the unit and press ENTER. When the connection process finishes, audio played back on the unit will be reproduced from the Bluetooth speakers/headphones. Note ▪ If the desired Bluetooth device is not displayed on the list, set the Bluetooth device to the pairing mode and then select "Device Search". ▪ Follow one of the procedures below to terminate the Bluetooth connection. - Perform the disconnect operation on the Bluetooth speakers/headphones. - Press the SETUP key, then use the cursor keys to select "Bluetooth", then "Transmitter", and then "Off". 43 En