Yamaha RX-V383 RX-V383 Owner s Manual - Page 55
Distance
View all Yamaha RX-V383 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Surround Selects whether or not surround speakers are connected and their sizes. Settings Small Large None Select this option for small speakers. The subwoofer or front speakers will produce surround channel lowfrequency components (configurable in "Crossover"). Select this option for large speakers. The surround speakers will produce all of the surround channel frequency components. Select this option when no surround speakers are connected. The front speakers will produce surround channel audio. Virtual CINEMA DSP works when you select a sound program. Crossover Sets the lower limit of the low-frequency components that can be output from a speaker whose size is set to "Small". A frequency sound lower than the specified value will be produced from the subwoofer or front speakers. Settings 40 Hz, 60 Hz, 80 Hz, 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz Note If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and crossover frequency to maximum. Subwoofer Phase Sets the phase of the subwoofer. When the bass sound is lacking or unclear, switch the subwoofer phase. Settings Normal Reverse Does not reverse the subwoofer phase. Reverses the subwoofer phase. Extra Bass Enables/disables Extra Bass. When Extra Bass is enabled, you can enjoy enhanced bass sounds, regardless of the size of the front speakers and the presence or absence of the subwoofer. Settings Off Disables Extra Bass. On Enables Extra Bass. Note You can also use BASS on the remote control to enable/disable Extra Bass (p.36). Virtual CINEMA FRONT Selects whether to use the front 5-channel speaker (Virtual CINEMA FRONT) configuration. Settings Off Disables the front 5-channel speaker configuration. On Enables the front 5-channel speaker configuration. Note ▪ Select "On" only when utilizing the Virtual CINEMA FRONT configuration (p.13). ▪ This setting is not available when "Surround" is set to "None". n Distance Sets the distance between each speaker and listening position so that sounds from the speakers reach the listening position at the same time. First, select the unit of distance from "Meter" or "Feet". Choices Front L, Front R, Center, Surround L, Surround R, Subwoofer Setting range 0.30 m to 24.00 m (1.0 ft to 80.0 ft), 0.05 m (0.2 ft) increments Default Front L, Front R, Subwoofer: 3.00 m (10.0 ft) Center: 2.60 m (8.6 ft) Others: 2.40 m (8.0 ft) 55 En