Yamaha RX-V383 RX-V383 Owner s Manual - Page 68
Selecting the HDMI 4K signal format 4K MODE, Restoring the default settings INIT, Updating - firmware
View all Yamaha RX-V383 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Selecting the HDMI 4K signal format (4K MODE) LINK MASTER OUT 2 ECO 4K STEREO TUNED ZONE SLEEP PARTY 2 A 3 B Hi-Res ENHANCER YPAO VOL. A- DRC MODE•MODE 1 VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR Selects the format of signals input/output at the unit when HDMI 4K compatible TV and playback device are connected to the unit. Settings MODE 1 MODE 2 Inputs/outputs 4K signals shown in the table below. Depending on the connected device or HDMI cables, video may not be displayed correctly. In this case, select "MODE 2". Inputs/outputs 4K signals shown in the table below. Note When "MODE 1" is selected, use a Premium High Speed HDMI Cable or Premium High Speed Cable with Ethernet. Format 4K/60, 50 Hz 4K/30, 25, 24 Hz RGB 4:4:4 YCbCr 4:4:4 YCbCr 4:2:2 YCbCr 4:2:0 RGB 4:4:4 YCbCr 4:4:4 YCbCr 4:2:2 8 bit 4 4 MODE 1 10 bit 12 bit - - 4 4 4 4 4 8 bit 4 4 4 MODE 2 10 bit 12 bit 4 Restoring the default settings (INIT) LINK MASTER STEREO TUNED ZONE SLEEP PARTY 2 A 3 B OUT 2 Hi-Res ENHANCER YPAO VOL. A- DRC INIT••••CANCEL ECO VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR Restores the default settings for the unit. Choices ALL CANCEL Restores the default settings for the unit. Does not perform an initialization. Updating the firmware (UPDATE) LINK MASTER STEREO TUNED ZONE SLEEP PARTY 2 A 3 B OUT 2 Hi-Res ENHANCER YPAO VOL. A- DRC UPDATE USB ECO VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR New firmware that provides additional features or product improvements will be released as needed. Updates can be downloaded from our website. For details, refer to the information supplied with updates. n Firmware update procedure Do not perform this procedure unless firmware update is necessary. Also, make sure you read the information supplied with updates before updating the firmware. 1 Save the downloaded firmware to the root folder of a USB memory device. 2 Press PROGRAM on the front panel to select "UPDATE". 3 Connect the USB memory device to the USB jack. 4 To start firmware update, press INFO on the front panel. Checking the firmware version (VERSION) LINK MASTER STEREO TUNED ZONE SLEEP PARTY 2 A 3 B OUT 2 Hi-Res ENHANCER YPAO VOL. A- DRC ECO VOL. MUTE VIRTUAL VERSION••xx.xx FPL FPR SL SW SR SBL SB SBR Check the version of firmware currently installed on the unit. Note It may take a while until the firmware version is displayed. 68 En