Yamaha RX-V483 RX-V483 Owner s Manual - Page 30
Optimizing the speaker settings automatically YPAO - test
View all Yamaha RX-V483 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
8 Optimizing the speaker settings automatically (YPAO) The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room. Note ▪ When you use the front 5.1-channel speaker (Virtual CINEMA FRONT) configuration (p.16), set "Virtual CINEMA FRONT" (p.82) in the "Setup" menu to "On" beforehand. ▪ Please note the following when using YPAO. - Use YPAO after connecting a TV and speakers to the unit. - During the measuring process, test tones are output at high volume. Ensure that the test tones do not frighten small children. - During the measuring process, you cannot adjust the volume. - During the measuring process, keep the room as quiet as possible. - Do not connect headphones. - Do not stand between the speakers and the YPAO microphone during the measurement process (about 3 minutes). 1 Press z (receiver power) to turn on the unit. 2 Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack). Note Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display. 3 Turn on the subwoofer and set the volume to half. If the crossover frequency is adjustable, set it to maximum. VOLUME CROSSOVER/ HIGH CUT 9 4 Place the YPAO microphone at your listening position and connect it to the YPAO MIC jack on the front panel. Note Place the YPAO microphone at your listening position (same height as your ears). We recommend the use of a tripod as a microphone stand. You can use the tripod screws to stabilize the microphone. The unit (front) 1 2 9 3 4 5 Ear height The following screen appears on the TV. MIN MAX MIN MAX Note If you are using bi-amp connections or Zone B speakers, set "Power Amp Assign" (p.81) in the "Setup" menu to the appropriate setting before starting YPAO. 30 En 1 1 "Power Amp Assign" setting (p.81)