Yamaha RX-V483 RX-V483 Owner s Manual - Page 36
Using the WPS button configuration - connect to wifi
View all Yamaha RX-V483 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
9 On the iOS device, select the unit as the AirPlay speaker in the WiFi screen. iOS 10 (example of English version) The name of the unit 10 Select the network (access point) of which you want to share the settings with the unit. Tap here to start setup The network currently selected When the sharing process finishes, the unit is automatically connected to the selected network (access point) and "Completed" appears on the front display. If "Not shared" or "Not connected" appears, press ENTER to repeat from step 5 or try another connection method. 11 To exit from the menu, press SETUP. n Using the WPS button configuration You can easily set up a wireless connection with one push of the WPS button. 1 Press z (receiver power) to turn on the unit. 2 Hold down INFO (WPS) on the front panel for 3 seconds. "Press WPS button on Access Point" appears on the front display. 3 Push the WPS button on the wireless router (access point). When the connection process finishes, "Completed" appears on the front display. If "Not connected" appears, repeat from step 1 or try another connection method. Note ▪ Depending on the model of the wireless router (access point), the unit may not connect to it. In this case, try connection with "Access Point Scan" or "Manual Setting" (p.37). ▪ You can use "WPS Button" (p.37) in the "Setup" menu to set up a wireless connection with the WPS button. About WPS ▪ WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy establishment of a wireless home network. 36 En