Yamaha RX-V571 Setup Guide - Page 7

3 Confirm that "Save / Exit" is selected, and then press ENTER. When "W-1: Out of Phase" appears Use the following procedure to check the speaker connections. Warning messages may appear depending on the types of speakers or the place where you set them even if they are connected correctly. 4 Confirm that "SAVE" is selected, and then press ENTER. 5 Remove the YPAO microphone from the unit. All the settings for the speakers are complete. • The YPAO microphone is sensitive to heat. Protect the YPAO microphone from high temperatures (such as from AV equipment) and direct sunlight. a Press the cursor key to select "Result," and then press ENTER. b Confirm that "Wiring" is selected. c Check the cable connection (+ and -) of the speaker indicated as red-boxed "Reverse." If the speakers are connected correctly: Save the results of the measurement. Press RETURN, and go to step 3 on the left column. If the speakers are connected incorrectly: Turn off the unit and connect the speaker cables again, and then try YPAO measurement again. 7