Yamaha RX-V657 MCXSP10 Manual - Page 62

ADVANCED OPERATIONS ADVANCED OPERATIONS Selecting the OSD mode You can display this unit's operating information on a video monitor. If you display the SET MENU and sound field program parameter settings on a monitor, it is much easier to see the available options and parameters than it is by reading this information on the front panel display. 1 Turn on the video monitor connected to this unit. 2 Press ON SCREEN repeatedly to change the OSD mode. The OSD mode changes in the following order: full display, short DISPLAY ON SCREEN display, and display off. Full display Always shows the sound field program parameter settings as well as the contents of the front panel display. Short display Briefly shows the contents of the front panel display at the bottom of the screen each time you operate this unit. Display off Only operations performed using ON SCREEN are displayed. The OSD is displayed when using SET MENU or the test tone feature, even if the OSD mode is set to "Display off". P04 MOVIE THEATER . General DSP LEVEL;;;;0dB P.INIT.DLY;;15ms P.ROOM SIZE;;1.0 S.INIT.DLY;;20ms S.ROOM SIZE;;1.0 Full display P04 MOVIE THEATER General Short display Notes • The OSD signal is not output to the REC OUT jack, and will not be recorded. • You can set the OSD to turn on (gray background) or off when a video source is not being reproduced (or the source component is turned off) by using "DISPLAY SET" (see page 70). • When using component video signals, the "Short display" is not output to the COMPONENT VIDEO MONITOR OUT jacks. To display the OSD with component video signal input, set the OSD mode to "Full display" while GRAY BACK in DISPLAY SET (see page 70) is set to AUTO. Using the sleep timer Use this feature to automatically set this unit in the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off any external components connected to AC OUTLET(S). ■ Setting the sleep timer CODE SET TRANSMIT POWER TV POWER AV STANDBY CD MD/CD-R TUNER SYSTEM POWER SLEEP DVD DTV/CBL V-AUX MULTI CH IN VCR 1 DVR/VCR2 AMP 2 TV VOL TV CH VOLUME TV MUTE TV INPUT 1 Select a source and start playback on the source component. 2 Press SLEEP repeatedly to set the amount of time. SLEEP Each time you press SLEEP, the front panel display changes as shown below. The SLEEP indicator flashes while switching the amount of time for the sleep timer. SLEEP 120min SLEEP 90min SLEEP OFF SLEEP 30min SLEEP 60min DVR/VCR2 VCR1 V-AUX SP A DTV/CBL DVD HiFi DSP MD/CD-R TUNER CD TUNED SLEEP PHONO VOLUME dB L R The SLEEP indicator lights up in the front panel display, and the display returns to the selected sound field program. SLEEP indicator DVR/VCR2 VCR1 V-AUX DTV/CBL DVD MD/CD-R TUNER TUNED SP A TV Sports CD SLEEP PHONO VOLUME dB L R 58