Yamaha RX-V677 RX-V677 Firmware Update Installation Manual - Page 5

Start firmware update, Select FIRM UPDATE from the menu, Congratulations - remote control

Get Yamaha RX-V677 PDF manuals and user guides View all Yamaha RX-V677 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

6 Start firmware update a. Press INFO (WPS) key to start the update. (Update process may take up to 10 minutes) * If " UPDATE SUCCESS " appears, this means your receiver is already up-to-date. In this case, power off to exit from Advanced Setup. Your AV receiver is ready for normal use. Firmware update in progress Caution DO NOT interrupt power during the update. In case the power is accidentally cut off resulting in a condition where you can't recover normal operation, refer to the troubleshooting method (Troubleshooting CASE 2) on the last page. b. When completed, " UPDATE SUCCESS " appears on the display. c. Turn off the power of the receiver by pressing the MAIN ZONE key. MAIN ZONE key INFO (WPS) key USB port 7 Select "FIRM UPDATE" from the menu a. Power on the AV receiver and press the ON SCREEN key on the remote control. b. Select "Information" > "System". c. Confirm that the firmware version is updated to the latest version. ON SCREEN key Congratulations! You have completed the firmware update. Your AV receiver is ready for normal use.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
6
Start firmware update
a. Press
INFO (WPS)
key to start the update.
(Update process may take up to 10 minutes)
*
If “ UPDATE SUCCESS ” appears, this means your receiver is already up-to-date. In this case, power off to exit
from Advanced Setup. Your AV receiver is ready for normal use.
Firmware update in progress
Caution
DO NOT interrupt power during the update.
In case the power is accidentally cut off resulting in a condition where you can’t recover normal operation, refer to
the troubleshooting method (
Troubleshooting CASE 2
) on the last page.
b.
When completed, “ UPDATE SUCCESS ” appears on the display.
c.
Turn off the power of the receiver by pressing the
MAIN ZONE
key.
7
Select “FIRM UPDATE” from the menu
a. Power on the AV receiver and press the
ON SCREEN
key on the remote control.
b. Select “Information” > “System”.
c.
Confirm that the firmware version is updated to the latest version.
ON SCREEN key
Congratulations!
You have completed the firmware update. Your AV receiver is ready for normal use.
USB port
MAIN ZONE
key
INFO (WPS) key