Yamaha RX-V757 Owner's Manual - Page 59

BASIC OPERATION RECORDING RECORDING Recording adjustments and other operations are performed from the recording components. Refer to the operating instructions for those components. VOLUME OPTIMIZER MIC STANDBY /ON PHONES SPEAKERS A B SILENT CINEMA PRESET/TUNING FM/AM EDIT SEARCH MODE XIM A/B/C/D/E NEXT CATEGORY l PRESET/TUNING/CH h LEVEL MEMORY TUNING MODE MAN'L/AUTO FM AUTO/MAN'L MONO DISPLAY PROGRAM INPUT STRAIGHT TONE CONTROL INPUT MODE MULTI CH INPUT PURE DIRECT EFFECT S VIDEO VIDEO AUX VIDEO L AUDIO R OPTICAL (U.S.A. model) 1 2 1 TRANSMIT RE-NAME CLEAR LEARN SYSTEM POWER STANDBY SLEEP INPUT MODE A B PHONO MULTI CH IN V-AUX TUNER MD/CD-R CD DTV/CBL VCR 1 DVR/VCR2 DVD 2 SELECT 1 Turn on the power of this unit and all connected components. 2 Select the source component you want to record from. Notes • When this unit is set in the standby mode, you cannot record between other components connected to this unit. • The setting of TONE CONTROL, VOLUME, "SPEAKER LEVEL" (page 66) and programs does not affect recorded material. • A source connected to the MULTI CH INPUT jacks of this unit cannot be recorded. • S-video and composite video signals pass independently through this unit's video circuits. Therefore, when recording or dubbing video signals, if your video source component is connected to provide only an S-video (or only a composite video) signal, you can record only an S-video (or only a composite video) signal to your VCR. • Digital signals input to the DIGITAL INPUT jacks are not output to the analog AUDIO OUT (L/R) jacks for recording. Likewise, analog signals input to the AUDIO IN (L/R) jacks are not output to the DIGITAL OUTPUT jack. Therefore, if your source component is connected to provide only digital (or analog) signals, you can only record digital (or analog) signals. • A given input source is not output on the same REC OUT channel. (For example, the signal input from VCR 1 IN is not output on VCR 1 OUT.) • Check the copyright laws in your country to record from records, CDs, radio, etc. Recording of copyrighted material may infringe copyright laws. If you playback a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture itself may be disturbed due to those signals. INPUT or Front panel A B PHONO MULTI CH IN V-AUX TUNER MD/CD-R CD DTV/CBL VCR 1 DVR/VCR2 DVD Remote control 3 Start playback (or select a broadcast station) on the source component. 4 Start recording on the recording component. y Do a test recording before you start an actual recording. ■ Special considerations when recording DTS software The DTS signal is a digital bitstream. Attempting to digitally record the DTS bitstream will result in noise being recorded. Therefore, if you want to use this unit to record sources that have DTS signals recorded on them, the following considerations and adjustments need to be made. For DVDs and CDs encoded with DTS, when your player is compatible with the DTS format, follow its operating instructions to make a setting so that the analog signal will be output from the player. 55