Yamaha RX-V795a Owner's Manual - Page 67

English REMOTE CONTROLLER A LEVEL This key is used to adjust the output level of the center speaker, rear speakers and subwoofer. First, press this key. Then select the speaker(s) by pressing this key repeatedly or by using the or key (0). The name will be illuminated on the display. Then press the or key (0) to change the output level. B STANDBY Press this key to set this unit in the standby mode. C Indicator This indicator flashes when a key is pressed on the remote controller. (Transmitting infrared signals.) D CHURCH If the DSP key (5) is pressed, you can select the CHURCH program by pressing this key while the indicator (C) is illuminated. E TEST This key is used when adjusting the speaker balance. (Refer to pages 30 to 32.) F EFCT ON/OFF Press this key to turn on/off the digital sound field processor, which includes the Dolby Pro Logic decoder, Dolby Digital decoder and DTS decoder. G ON SCREEN Press this key to change the type of display on the monitor screen. Three types of displays are available. Each time the key is pressed, the information can be changed to a full, simple and no display. H SET MENU Press this key to turn the unit into the SET MENU mode. Select a function by pressing this key repeatedly or by using the or key (0). The function name will be illuminated on the display. Then press the or key (0) to adjust or make settings in the function. Ⅵ DSP DSP POWER STANDBY DSP DSP program selector keys /DTS SURROUND CD 1 MONO MOVIE DVD/LD 4 ROCK PHONO 7 HALL EXT. DEC. 0 MOVIE THEATER 1 TUNER 2 TV SPORTS TV/DBS 5 JAZZ CLUB V-AUX 8 +10 ENTER MOVIE THEATER 2 TAPE/MD 3 DISCO VCR 6 CHURCH 9 +TEST 100 CLEAR The functions of all keys are the same with the AMP/TUN position except the DSP program selector keys figured on the left. DSP program selector keys Press a key corresponding to the DSP program you want to select. The program is directly selected. Note: Press "0" to select the program No. 10. 63