Yamaha Rio1608-D2 Rio3224-D2/Rio1608-D2 Owners Manual [English] - Page 31

Specifications Specifications General Specifications Sampling Frequency Signal Delay Frequency Response Total Harmonic Distortion*1 Hum&Noise*2 Dynamic Range Crosstalk@1 kHz Dimensions (WxHxD) and Net Weight Power Requirements (wattage) Power Requirements (voltage and hertz) Temperature Range NC value Included Accessories 44.1 kHz +4.1667%, +0.1%, -0.1%, -4.0% ±200 ppm External 48 kHz +4.1667%, +0.1%, -0.1%, -4.0% 88.2 kHz +4.1667%, +0.1%, -0.1%, -4.0% ±200 ppm ±200 ppm 96 kHz +4.1667%, +0.1%, -0.1%, -4.0% ±200 ppm Less than 1.7 ms Rio-D2 INPUT to Rio-D2 OUTPUT connect with PM10 using Dante, Fs= 96 kHz. Dante Receive Latency set to 0.25 msec +0.5, -1.5 dB 20 Hz-20 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 48 kHz +0.5, -1.5 dB 20 Hz-40 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 96 kHz Less than 0.05% 20 Hz-20 kHz@+4 dBu into 600Ω, Fs= 48 kHz Less than 0.05% 20 Hz-40 kHz@+4 dBu into 600Ω, Fs= 96 kHz INPUT to OUTPUT, Input Gain= Min. -128 dBu typ., Equivalent Input Noise, Input Gain= Max. -88 dBu Residual output noise, ST master off. 112 dB typ., DA Converter, 108 dB typ., INPUT to OUTPUT, Input Gain= Min. -100 dB*3, adjacent INPUT/OUTPUT channels, Input Gain= Min. Rio3224-D2: 480 mm x 220 mm x 367.5 mm, 13.5 kg Rio1608-D2: 480 mm x 132 mm x 367.5 mm, 9.6 kg Rio3224-D2: 120 W Rio1608-D2: 72 W 100-240V 50/60 Hz Operating temperature range: 0 - 40°C Storage temperature range: -20 - 60°C Rio3224-D2 FAN MODE LOW: NC=20 / HIGH: NC=30 Rio1608-D2 FAN MODE LOW: NC=15 / HIGH: NC=25 Measurement position: 1 m from the front of the unit Owner's Manual, AC power cord, Dante Virtual Soundcard Token leaflet *1. Total Harmonic Distortion is measured with 18 dB/octave filter @80 kHz *2. Hum & Noise are measured with A-Weight filter. *3. Crosstalk is measured with a 30 dB/octave filter @22 kHz Owner's Manual 31