Yamaha Rio1608-D2 Rio3224-D2/Rio1608-D2 Owners Manual [English] - Page 32

Specifications Analog Input Characteristics Input Terminals INPUT 1-16 INPUT 17-32*2 GAIN +66 dB -6 dB +66 dB -6 dB Actual Load Impedance 7.5 kΩ 7.5 kΩ For Use With Nominal 50-600Ω Mics & 600Ω Lines 50-600Ω Mics & 600Ω Lines Input Level Nominal Max. before clip -62 dBu (0.616 mV) -42 dBu (6.16 mV) +10 dBu (2.45 V) +30 dBu (24.5 V) -62 dBu (0.616 mV) -42 dBu (6.16 mV) +10 dBu (2.45 V) +30 dBu (24.5 V) Connector XLR-3-31 type (Balanced)*1 XLR-3-31 type (Balanced)*1 *1. XLR-3-31 type connectors are balanced. (1= GND, 2= HOT, 3= COLD) *2. Rio3224-D2 only * In these specifications, 0 dBu= 0.775 Vrms. * +48V DC ( phantom power ) is supplied to INPUT XLR type connectors via each individual software controlled switch. Analog Output Characteristics Output Terminals OUTPUT 1-8 OUTPUT 9-16*3 Actual Source Impedance For Use With Nominal 75Ω 600Ω Lines 75Ω 600Ω Lines Max.Output Level Select SW*1 +24 dB (default) +18 dB +24 dB (default) +18 dB Output Level Nominal Max. before clip Connector +4 dBu (1.23 V) -2 dBu (616 mV) +4 dBu (1.23 V) -2 dBu (616 mV) +24 dBu (12.3 V) +18 dBu (6.16 V) +24 dBu (12.3 V) +18 dBu (6.16 V) XLR-3-32 type (Balanced)*2 XLR-3-32 type (Balanced)*2 *1. There are switches inside the body to preset the maximum output level. *2. XLR-3-32 type connectors are balanced. (1= GND, 2= HOT, 3= COLD ) *3. Rio3224-D2 only * In these specifications, 0 dBu= 0.775 Vrms. Digital I/O Characteristics Terminals Format Data length Level Primary/Secondary Dante 24-bit or 32-bit 1000BASE-T Audio 32ch (Rio3224-D2 to other devices) 24ch (Other devices to Rio3224-D2) 16ch (Rio1608-D2 to other devices) 8ch (Other devices to Rio1608-D2) Connector etherCON Cat5e Digital Output Characteristics Terminal AES/EBU OUT 1-8*1 AES/EBU Format AES/EBU Professional use*1 Data Length 24-bit *1. Rio3224-D2 only *2. XLR-3-32 type connectors are balanced. (1= GND, 2= HOT, 3= COLD) Level RS422 Connector XLR-3-32 type (Balanced)*2 32 Owner's Manual