Yamaha SY85 Owner's Manual (feature Reference) (image) - Page 224

1: CARD ALL LOAD/SAVE [UTILITY] → [CARD] → [MENU] → 1:ALL Load/Save → [ENTER/YES] Saves or loads all internal voices and performance combinations to or from a Yamaha MCD64 memory card plugged into to the DATA card slot. CARD`All Card= [LOAD]SAVE```````Card`````¥`Internal```` F1 F2 F3 F4 F5 F6 F7 F8 CS1 CS2 CS3 CS4 CS5 CS6 CS7 CS8 Before executing a load or save operation, check the card status as shown in the upper right corner of the display. If the display shows "Card=", a properly formatted MCD64 is installed and the load or save operation can be executed. If the wrong type of card (wrong format) or no card is installed in the DATA slot, however, the card status display will show "Card=" and no load or save operation is possible. You will have to use the card format job, described next, to format a new memory card or one that has been formatted for use with a different instrument before the card can be used with the SY85. Also make sure that the card write protect switch (see MCD64 Memory Card operation manual) is set to the "OFF" position before attempting to save data to the card. Press the [F1] key to highlight "LOAD" on the display if you want to load the voices and performance combinations from the card into the SY85's internal memory, or press the [F2] key to highlight "SAVE" on the display if you want to save the voice and performance data from the internal memory to the card. Press [ENTER/YES] to begin the card load or save procedure. The following confirmation display will appear: CARD`All Card= [LOAD]SAVE```````Card`````Are`you`sure`? Press [ENTER/YES] again to confirm that you want to go ahead with the card load or save operation, or press [EXIT/NO] to cancel. When the data has been loaded or saved, "Completed!" will appear briefly on the display. UTILITY MODE / CARD 223