Yamaha TSX-20 Owners Manual - Page 11
Standing the main unit and/or speakers on a surface
View all Yamaha TSX-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
English GETTING STARTED I Standing the main unit and/or speakers on a surface You can stand the main unit and/or the speakers on a hard surface at an angle of 45 degrees or 70 degrees using the supplied stands. 1 Peel off the seals of the non-slip pads and apply them to the bottom of the main unit and the stands. * The standing angle can be selected as 45 or 70 degrees by attaching the stands upside-down. Main unit 70 degrees 45 degrees Stand Non-slip pad 2 Attach the stand to the main unit and/or the speakers with the screws. Main unit 3 Fine adjustment can be made by sliding the position of a screw within a rectangular hole so that you can align the main unit and the speakers. Speaker Note Change the setting of the remote control sensor switch so that the main unit can receive the remote control signal properly; ● When the switch is set to the HRIZ position, the sensor A is active. ● When the switch is set to the OTHER position, the sensor B is active. Remote control sensor switch HRIZ OTHER B A 9